Flooring installation, refinishing and repair across Toronto. Call (365) 360-6167

Hardwood Floor Installation Cost in Toronto

Reddish-brown hardwood floor installed through a large open room in a Roncesvalles home in Toronto

Hardwood floor installation in Toronto costs $9-$18 per sq ft for solid and $8-$16 for engineered, before HST. See labour, extras and a 500 sq ft example.

Hardwood floor installation in Toronto costs $9 to $18 per square foot for solid hardwood and $8 to $16 per square foot for engineered hardwood, with materials and labour included, before 13% HST. Removing the old floor, levelling the subfloor and finishing the stairs are priced on top, and a written quote lists each one on its own line.

Key takeaways

  • Solid hardwood suits the wood subfloors in Toronto houses; engineered hardwood is the usual choice over concrete in condos and basements.
  • Labour is only part of the price. Species, grade and board width move the material cost more than anything else.
  • Old floor removal, subfloor levelling and stairs are the extras that change a quote the most.
  • A few bedrooms usually take one to three days to install once the boards have acclimated.
  • All prices in this guide are before tax, so add HST when you set your budget.

What is the labour cost to install hardwood floors per square foot?

Labour alone runs $3 to $5 per square foot for solid hardwood and $2 to $5 per square foot for engineered hardwood. That is the rate when you buy the wood yourself and hire us to install it.

The rest of the installed price is the flooring. Red and white oak sit at the lower end, while wider planks, clear grades and species like walnut push the price toward the top of the range. Two floors with the same square footage can land thousands of dollars apart for that reason alone, so the quote names the species, grade and board width on its own line. That way a select-grade price is never compared with a lower grade by mistake.

Wide-plank character-grade hickory hardwood installed in a Midtown Toronto kitchen before the cabinets went in
Wide-plank hickory installed in a Midtown Toronto kitchen.

Labour also depends on the method. Solid hardwood is nailed down over a plywood subfloor. Engineered planks can be nailed, glued to concrete or floated over underlay, and glue-down work over a slab takes longer than a floating install.

Solid vs engineered hardwood: which costs more?

Engineered hardwood costs slightly less at both ends of the range, but the bigger difference between the two is where each one can go.

Solid hardwood is a single piece of wood, usually 3/4 inch thick. For our usual installations it is nailed to a suitable wood subfloor, so it suits the main floors and bedrooms of Toronto houses, and it can be sanded and refinished several times over its life.

Engineered hardwood has a real wood wear layer on a cross-layered core. The core moves less when the humidity changes, which makes it the more practical choice over concrete slabs in condos and basements. Before it goes down, a moisture test has to confirm that the slab and the installation system meet the flooring manufacturer’s requirements. How many times it can be refinished depends on the thickness of that wear layer, so check it before you buy.

In a condo, the building’s declaration and rules usually set the underlay. Acoustic underlay adds $0.80 to $3.50 per square foot, and the board often wants to see the spec sheet before work starts.

What else adds to the price of a new hardwood floor?

Removal, subfloor work and stairs are the three extras that change a hardwood quote the most.

  • Old floor removal: $1 to $2 per square foot for carpet, laminate or vinyl, and $3 to $6 per square foot for tile. Removing existing hardwood or other hard-to-lift flooring is priced after we see it.
  • Levelling: $1 to $4 per square foot to fill dips and flatten humps before the new floor goes down.
  • New plywood subfloor: $2 to $5 per square foot where the old subfloor is soft or damaged.
  • Stairs: new hardwood treads and risers cost $185 to $350 per step, stained to match the floor.

Older Toronto houses often need the levelling line. Joists settle over a century, boards squeak and a new floor shows every dip if the base is not fixed first, so we check flatness and fasten loose subfloor before any boards go down.

Old flooring removed down to the subfloor panels in a Lawrence Park living room before the new floor went in
Subfloor prep in a Lawrence Park living room before the new floor.

One more step matters in older homes. Vinyl and asphalt floor tile in older Toronto houses can contain asbestos, including some flooring installed before 1990. If you find suspect tile or adhesive under an existing floor, have it assessed and tested by a qualified professional before it is disturbed. If asbestos is confirmed, it has to be removed using the proper procedures.

What does a 500 sq ft hardwood floor cost in Toronto?

A 500 square foot solid hardwood floor with removal of old carpet, laminate or vinyl comes to about $5,000 to $10,000 before tax, or $5,650 to $11,300 with 13% HST.

Here is how that adds up:

  • Solid hardwood, installed: 500 sq ft at $9 to $18 = $4,500 to $9,000
  • Removal of carpet, laminate or vinyl: 500 sq ft at $1 to $2 = $500 to $1,000
  • Total before tax: $5,000 to $10,000

A floor with a sound, flat subfloor and standard materials sits near the low end. Premium wide-plank hardwood pushes the installed price higher, while levelling, subfloor repairs and stairs are charged separately and can take the total above this example.

How long does hardwood floor installation take?

A few bedrooms usually take one to three days of install time. Before that, the boards sit in your home so they adjust to the rooms they are going into.

Bundles of oak strip flooring opened on building paper to acclimate in a High Park home before installation
Oak strip flooring acclimating in a High Park home before install.

The schedule runs in this order: measure and quote, order the wood, deliver it to acclimate, remove the old floor, fix the subfloor, install, then fit thresholds, stair nosings and baseboards. In a condo, elevator bookings and building work hours set the pace as well.

Once the floor is in, keep indoor humidity between 30% and 50%, the range Health Canada recommends. Dry furnace air in a Toronto winter shrinks wood and opens gaps between boards, and humid summers can make boards cup. A humidifier in winter keeps the floor steady.

Is laminate cheaper than hardwood?

Yes. Laminate costs $3 to $8 per square foot installed and vinyl plank costs $5 to $10, so both come in well under solid hardwood.

Laminate gives a wood look with a hard wear surface, and vinyl plank adds water resistance for kitchens and basements. Neither can be sanded and refinished, so when the surface wears out, the floor is replaced. Hardwood costs more up front and can be refinished for decades.

If your home already has hardwood, check it before you replace it. Refinishing costs $4.50 to $8 per square foot, and where the boards are solid with enough wood left above the tongue, it brings an old floor back for a fraction of the cost of a new one.

Get a written hardwood quote in Toronto

Toronto Flooring Contractors installs solid and engineered hardwood across Toronto, from single bedrooms to full main floors and stairs. Every job starts with a site visit, a check of the subfloor and moisture, and a written quote that lists materials, labour, removal and prep line by line, with HST shown separately. See our hardwood floor installation page for species, methods and how to book.

Back to top